Author Topic: Wireless connection  (Read 2143 times)

Offline Pinguy

  • Administrator
  • Full
  • *****
  • Posts: 191
  • Karma +4/-0
  • Pinguy Master!
  • Location: United Kingdom
    • Pinguy OS
Re: Wireless connection
« on: August 31, 2010, 07:13:37 pm »
These are my out-puts.

Code: [Select]
pinguy@pinguy-desktop:~$ nm-tool

NetworkManager Tool

State: connected

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            forcedeth
  State:             unavailable
  Default:           no
  HW Address:        00:23:54:D5:DD:BD

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off


- Device: wlan0  [Auto Pinguy] -------------------------------------------------
  Type:              802.11 WiFi
  Driver:            rt61pci
  State:             connected
  Default:           yes
  HW Address:        00:18:F8:30:7A:AF

  Capabilities:
    Speed:           54 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    SKY43151:        Infra, 00:1F:95:A3:A8:90, Freq 2462 MHz, Rate 54 Mb/s, Strength 48 WPA
    *Pinguy:         Infra, 00:24:B2:00:24:7A, Freq 2437 MHz, Rate 54 Mb/s, Strength 97 WPA

  IPv4 Settings:
    Address:         192.168.0.4
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.0.1

    DNS:             192.168.0.1
I'm the Pinguy OS developer.

DONATE TO PINGUY OS or show some love on Flattr.com